upgrade2 image-file factory-default
The upgrade2 image-file factory-default command upgrades the system by using upgrade2 command and recoveries configuration to factory default settings.
Command Syntax
upgrade2 image-file <image-name> factory-default
Parameter
Parameter | Description |
image-file <image-name> | Specifies the image name with bin format (*.bin). |
Usage Guidelines
Before upgrading, save the important data in Flash to the local PC through FTP or TFTP, and then upload it to the switch after the upgrade is completed.
Example
- Upgrade the system by using upgrade2 command and recovery configuration to factory default settings.
admin@Xorplus> upgrade2 image-file onie-installer-picos-3.7.3-91bb175-x86.bin factory-default
Copyright © 2024 Pica8 Inc. All Rights Reserved.