set protocols arp inspection access-list ip mac-address


The set protocols arp inspection access-list ip mac-address command configures an ARP access list for ARP inspection.

NOTE:

When configuring the static access list for ARP Inspection, the same IP-MAC cannot exist in multiple access lists.


Command Syntax

set protocols arp inspection access-list <acl-name> ip <ipv4-addr> mac-address <mac-addr>


Parameters

Parameter

Description

access-list <acl-name>

Specifies access list name. The value is a string.

ip <ipv4-addr>

Specifies the IP address in a static ARP binding entry. The value is in dotted decimal notation.

mac-address <mac-addr>

Specifies the MAC address in a static ARP binding entry. The value is in the format H:H:H:H:H:H. An H contains 2 hexadecimal numbers.

Note that, the MAC address cannot be configured to a multicast MAC or the system MAC.


Example

  • Configure a static access list of ARP inspection that maps the IP address 10.0.0.1 to the MAC address 00:B0:BC:00:00:00.
admin@Xorplus# set protocols arp inspection access-list test1 ip 10.0.0.1 mac-address 00:B0:BC:00:00:00
admin@Xorplus# commit


Copyright © 2024 Pica8 Inc. All Rights Reserved.