set protocols arp inspection access-list ip mac-address

The set protocols arp inspection access-list ip mac-address command configures an ARP access list for ARP inspection.

NOTE:

When configuring the static access list for ARP Inspection, the same IP-MAC cannot exist in multiple access lists.

Command Syntax

set protocols arp inspection access-list <acl-name> ip <ipv4-addr> mac-address <mac-addr>

Parameters

Parameter	Description
access-list <acl-name>	Specifies access list name. The value is a string.
ip <ipv4-addr>	Specifies the IP address in a static ARP binding entry. The value is in dotted decimal notation.
mac-address <mac-addr>	Specifies the MAC address in a static ARP binding entry. The value is in the format H:H:H:H:H:H. An H contains 2 hexadecimal numbers. Note that, the MAC address cannot be configured to a multicast MAC or the system MAC.

Example

Configure a static access list of ARP inspection that maps the IP address 10.0.0.1 to the MAC address 00:B0:BC:00:00:00.

admin@Xorplus# set protocols arp inspection access-list test1 ip 10.0.0.1 mac-address 00:B0:BC:00:00:00
admin@Xorplus# commit