set protocols dhcp snooping binding file

Owned by Tracy Yang
May 24, 2024

The set protocols dhcp snooping binding file command configures a DHCP snooping binding file for synchronizing DHCP snooping entries from memory.


Command Syntax

set protocols dhcp snooping binding file <file-path>


Parameters

Parameter

Description

file <file-path>

Specifies a file path to save the DHCP snooping binding table.


Usage Guidelines

If a DHCP snooping binding file is specified, the DHCP snooping entries will be synchronized from the memory to the binding file. This prevents DHCP snooping entries data loss in case of power failure. By setting a DHCP snooping binding file, the system can directly load the existing snooping entries from the binding file after if recovers.


Example

  • Configure the DHCP snooping binding file.
admin@Xorplus# set protocols dhcp snooping binding file /tmp/run/dhcp_bind
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.