set l3-interface vlan-interface router-mac

Owned by Tracy Yang
Nov 28, 2023

The set l3-interface vlan-interface router-mac command configures the router MAC address of the anycast gateway.


Command Syntax

set l3-interface vlan-interface <vlan-interface-name> router-mac <macaddr>


Parameter

Parameter

Description

vlan-interface <vlan-interface-name>

Specifies the L3 VLAN interface. The value is a string.

router-mac <macaddr>

Specifies the virtual MAC address of anycast gateway. The value is a string in xx:xx:xx:xx:xx:xx format where x is a hexadecimal number.


Example

  • Configure the router MAC address of the anycast gateway.
admin@Xorplus# set l3-interface vlan-interface vlan10 router-mac 00:00:10:00:00:FE
admin@Xorplus# commit


Copyright © 2024 Pica8 Inc. All Rights Reserved.