set protocols bgp neighbor evpn route-reflector-client

Run the command set protocols bgp neighbor evpn route-reflector-client to configure the BGP node to act as a route reflector for the specified BGP peer for EVPN. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF.

The command delete protocols bgp neighbor evpn route-reflector-client can be used to delete this configuration.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} evpn route-reflector-client

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} evpn route-reflector-client

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF. The value is a string.
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.

Example

Configure the BGP to act as route reflector for the specified BGP peer for EVPN in VRF BLUE.

admin@Xorplus# set protocols bgp vrf BLUE neighbor 3.3.3.3 evpn route-reflector-client
admin@Xorplus# commit