set protocols bgp evpn vni advertise-svi-ip

Owned by Tracy Yang
Nov 28, 2023
1 min read

To advertise the local SVI IP address behind a specific VNI, run the command set protocols bgp evpn vni advertise-svi-ip. 

To delete the configuration, run the command delete protocols bgp evpn vni advertise-svi-ip.


Command Syntax

set protocols bgp evpn vni <vni> advertise-svi-ip

delete protocols bgp evpn vni <vni> advertise-svi-ip


Parameter

Parameter

Description

vni <vni>Specifies the VNI ID. The value is an integer that ranges from 1 to 16777215.


Example

  • Configure the device to advertise the local SVI IP behind VNI 20.
admin@Xorplus# set protocols bgp evpn vni 20 advertise-svi-ip
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.