set protocols evpn mh startup-delay
Run the command set protocols evpn mh startup-delay to configure the duration of time for which the device keeps the EVPN multihoming LAG interfaces in protocol down state after a device reboot or process restart. This delays allows the VXLAN overlay to complete its initialization and helps in a smooth operation.
Run the command delete protocols evpn mh startup-delay to remove this configuration and revert to default which is 180 seconds.
Command Syntax
set protocols evpn mh startup-delay <seconds>
delete protocols evpn mh startup-delayÂ
Parameter
Parameter | Description |
startup-delay <seconds> | Specifies the startup-delay in seconds. The value ranges from 0 to 216000, the default value is 180 seconds. |
Example
- Set the startup-delay to 200 seconds.
admin@Xorplus# set protocols evpn mh startup-delay 200 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.