set protocols bgp evpn default-originate

Owned by Tracy Yang
Nov 28, 2023
1 min read

To enable originating a default Type-5 route, run the command set protocols bgp evpn default-originate. Both the IPv4 and IPv6 default Type-5 routes are supported to be originated. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF.

The command delete protocols bgp evpn default-originate can be used to remove this configuration.


Command Syntax

set protocols bgp [vrf <vrf-name>] evpn default-originate <ipv4 | ipv6>

delete protocols bgp [vrf <vrf-name>] evpn default-originate  <ipv4 | ipv6>


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies the name of the VRF. The value is a string.

default-originate <ipv4|ipv6>

Specifies whether IPv4 or IPv6 Type-5 route to be originated.


Example

  • Configure the device to originate the IPv4 default Type-5 routes for VRF BLUE.
admin@Xorplus# set protocols bgp vrf BLUE evpn default-originate ipv4
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.