run show igmp-snooping
The run show igmp-snooping command shows the configuration information of IGMP snooping.
Command Syntax
run show igmp-snooping [vlan <vlan-id>]
Parameter
Parameter | Description |
vlan <vlan-id> | Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
Example
-  Show the configuration information of IGMP snooping.  Â
admin@XorPlus# run show igmp-snooping Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping            : Enabled Report suppression          : Enabled Robustness variable         : 2 Router aging time           : 260 Max response time           : 10 Query interval              : 60 Last member query count     : 2 Last member query interval  : 2
- Â Show the IGMP snooping configuration of a specific VLAN.
admin@XorPlus# run show igmp-snooping vlan 1 Vlan 1: ---------------------------------------------- IGMP snooping                      : Enabled IGMPv2 fast leave                  : Enabled IGMP querier state                 : Enabled IGMP querier source ip address     : 0.0.0.0 IGMP other querier timer           : 1 IGMP querier version               : 2
Copyright © 2024 Pica8 Inc. All Rights Reserved.