/
run show bgp
run show bgp
The run show bgp command to displays the BGP routing table.
Command Syntax
run show bgp
Parameter
None.
Example
• View the BGP routing table.
admin@Xorplus# run show bgp show bgp ipv4 unicast ===================== BGP table version is 2, local router ID is 4.4.4.4, vrf id 0 Default local pref 100, local AS 200 Status codes: s suppressed, d damped, h history, * valid, > best, = multipath, i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.10.0/24 192.168.20.1 0 100 32768 i Displayed 1 routes and 1 total paths show bgp ipv6 unicast ===================== No BGP prefixes displayed, 0 exist
, multiple selections available,
Related content
run show bgp
run show bgp
More like this
run show bgp
run show bgp
More like this
run show bgp
run show bgp
More like this
run show bgp
run show bgp
More like this
run show bgp
run show bgp
More like this
run show bgp
run show bgp
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.