set routing pbr map sequence match source-ipv6

The set routing pbr map sequence match source-ipv6 command configures a match rule based on the source IPv6 address for PBR traffic classification.

The delete routing pbr map sequence match source-ipv6 command deletes the configuration.

Command Syntax

set routing pbr map <map-name> sequence <sequence-number> match source-ipv6 <ipv6-address/prefix-length>

delete routing pbr map <map-name> sequence <sequence-number> match source-ipv6

Parameter

Parameter	Description
map <map-name>	Specifies the map name of a PBR policy. The value is a string.
sequence <sequence-number>	Specifies sequence number. The value is an integer that ranges from 1 to 700.
source-ipv6 <ipv6-address/prefix-length>	Specifies source IPv6 address, it should be an IPv6 subnet in the format of IPv6-address/prefix-length. For example, 2001::0/32.

Example

Configure a match rule based on the source IPv6 address for PBR traffic classification.

admin@PICOS# set routing pbr map PBR_map1 sequence 100 match source-ipv6 2001:a100::0/64
admin@PICOS# commit

PICOS-4.4.4_Configuration_Guide (Special Release)