set protocols snmp contact
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read
Loading data...
The set protocols snmp contact command configures the contact information for system maintenance. If a device fails, maintenance engineer can contact the vendor for device maintenance.
Command Syntax
set protocols snmp contact <contact>
delete protocols snmp contact
Parameter
Parameter | Description |
| contact <contact> | Specifies contact information of system maintenance. The value is a string. |
Example
 •This example configures the contact information for system maintenance.
admin@XorPlus# set protocols snmp contact support.pica8.com admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.