/
run show dhcp6 guard policy
run show dhcp6 guard policy
The run show dhcp6 guard policy command shows the information of the dhcp6 guard policy configuration.
Command Syntax
run show dhcp6 guard policy <policy-name>
Parameter
Parameter | Description |
policy <policy-name> | Specifies the guard policy. The value is a policy name. |
Example
View the information of the dhcp6 guard policy configuration.
admin@PICOS# run show dhcp6 guard policy p1
dhcp6 guard policy: p1
match:
server source-address: 2001::/64
reply ia-prefix: 3001::/64
preference-max: 255
preference-min: 0
device role: server
interface: ge-1/1/1
, multiple selections available,
Related content
run show dhcp6 guard policy
run show dhcp6 guard policy
More like this
run show dhcp6 guard
run show dhcp6 guard
More like this
run show dhcp6 guard
run show dhcp6 guard
More like this
set protocols dhcp6 guard policy interface
set protocols dhcp6 guard policy interface
More like this
set protocols dhcp6 guard policy interface
set protocols dhcp6 guard policy interface
More like this
set protocols dhcp6 guard policy device-role
set protocols dhcp6 guard policy device-role
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.