run show dhcp6 snooping binding


The run show dhcp6 snooping binding command displays the DHCPv6 snooping binding table, which includes the user MAC address, IP address, VLAN ID, access interface and the lease time.


Command Syntax

run show dhcp6 snooping binding


Parameter

None.


Example

  • Show the DHCPv6 snooping binding table.
admin@Xorplus# run show dhcp6 snooping binding
Total count:     2
MAC Address     IPv6 Address     Port            VLAN ID   Lease(sec)                  
--------------------------------------------------------------------------------------------
e4:f0:04:89:b6:46  0        ae65            1         0/0                                              
14:18:77:18:2c:b9   2::1       ae25            125       599/600

Table 1. Description of the run show dhcpv6 snooping binding command output

Item

Description

Mac Address

User MAC address.

IPv6 Address

User IPv6 address.

Port

User access interface.

VLAN ID

User VLAN ID.

Lease(sec)

Lease time for the IP address, in seconds. The format displayed

is Remaining Lease Time/Total Lease Time.

Copyright © 2024 Pica8 Inc. All Rights Reserved.