AG9032v1 Switch

Power 1 LED

• Solid Green – Power Supplier 1 is supplied to the switch & operating normally
• Blinking Amber – Power Supplier 1 failed.
• Off – Power is Disconnected.

At front

Power 2 LED

• Solid Green – Power Supplier 2 is supplied to the switch & operating normally.
• Blinking Amber – Power Supplier 2 failed.
• Off – Power is Disconnected.

At front

System LED

• Solid Green – Normal operation
• Blinking Green – Booting progress
• Solid Red – System is failed
• Off – No Power

At front

FAN Status LED

• Solid Green – FAN operating normally.
• Solid Amber – FAN failed.

At front

Management

     (RJ-45)

Two LEDs /port

Link LED: (on the left side)

• Off – No link is established on the port.
• Solid Yellow – A valid link at 10/100Mbps is established on the port.
• Solid Green – A valid link at 1000Mbps is established on the port.

 Act LED: (on the right side)

• Off – No link is established on the port.
• Blinking green – Activity, transmitting or receiving packet at this port.

At front

PSU LED

• Solid green – Good AC input.
• Solid red – NO AC input.

At rear

FAN Status LED

• Green – FAN operating normally.
• Red – FAN failed.

At rear

LED 1

• Green 100G operation
• Amber 40G operation
• Blue 25G operation
• Purple 10G operation
• Off No Link

LED 2

Working in breakout only.

• Blue 25G operation
• Purple 10G operation
• Off 40G/100G operation (Assuming LED 1 is illuminated) or No Link

LED 3

Working in breakout only.

• Blue 25G operation
• Purple 10G operation
• Off 40G/100G operation (Assuming LED 1 is illuminated) or No Link

LED 4

Working in breakout only.

• Blue 25G operation
• Purple 10G operation
• Off 40G/100G operation (Assuming LED 1 is illuminated) or No Link

NOTE:

Off: No Link  Solid: Linkup  Flashing: Traffic