AG7648 Switch

Feature

Detailed Description

Comment

System LED

• Solid green – All OK, CLI prompt available

• Blinking green – Boot-up in progress

• Solid yellow – Major Fault. Displays summary of all major faults within the system; the faults are traffic affecting.

• Blinking yellow – Minor Fault: Displays summary of all minor faults within the system; the faults are not traffic affecting.

At front

FAN LED

• Solid green –fan powered and @expected rpm

• Solid yellow –fan failed including incompatible airflow direction from what is indicated in the Board ID for the particular SKU.

At front

PSU LED

• Solid green – The DC output is on and OK.

• Solid yellow– Power supply critical event causing a shutdown; failure, OCP, OVP, Fan Fail, OTP, UVP.

• Blinking yellow–Power supply warning events where the power supply continues to operate; high temp (PMBus reading inlet > 60deg; PMBus reading hotspot > 100deg), high power, high current (105 %*), slow fan.

At rear

Power LED

• Off - No power

• Solid Yellow - POST in progress

• Solid Green - Normal Operation (dual or single supply)

• Blinking Yellow - One of Power Supplier is failed

At front

LOCATOR LED

Not supported.

At front

Feature

Detailed Description

Link LED

• Off – No Link

• Solid green – Link on 10G speed

• Solid amber – Link on 1G speed

Activity LED

• Off – No Link

• Blinking green – Transmit/Receive is activity

Feature

Detailed Description

Link/ACT LED

• Off – No Link

• Solid green – Link on 40G speed

• Solid Amber- Link on 10G speed

• Blinking green – 40G speed, transmit/Receive is activity

• Blinking amber – 10G speed, transmit/Receive is activity

Feature

Detailed Description

Link LED

• Off – No Link

• Solid green – Link on 1G speed

• Solid yellow – Link on 10M/100M speed

Activity LED

• Off – No Link

• Blinking green – Transmit/Receive is activity