AG5648V1 Switch

Label

Detailed Description

Comment

System LED

• Solid Green – Operating

• Blinking Green – Booting or System in Diagnostic mode

• Solid Amber – Critical Alarm

• Off – Power is Disconnected

At front side

Power LED

• Solid Green –2 Power Suppliers are supplied to the switch & operating normally

• Solid Amber –Booting or Single power supplier is installed/operating.

• Blinking Amber –2 Power Suppliers are installed, but only single power supply is operating.

• Off – Power is Disconnected.

At front side

FAN LED

• Solid Green – FAN operating normally.

• Solid Amber – A FAN or more failed

At front side

LED

Detailed Description

Link/ACT LED

• OFF –No link is established on the port.

• Solid Green – A valid link is established as 100GE on the port.

• Solid Amber – A valid link is established as 40GE on the port.

• Solid Blue – A valid link is established as 25GE on the port. (Through break out cable)

• Solid Purple –A valid link is established as 10GE on the port. (Through break out cable)

• Blinking LED – Packets transmission or reception is occurring

LED

Detailed Description

Link/ACT LED

• OFF –No link is established

• Two LEDs / Port Solid Green – A valid 25G link is established

• Solid Yellow – A valid 10G link is established

• Blinking LED – Packets transmission or reception is occurring

LED

Detailed Description

Link LED

• Solid Green = Port linked operating at max port speed, i.e. if auto-negotiated/forced to 1G mode

• Solid Amber = Port linked operating at lower speed, i.e. if auto-negotiated/forced to 10/100M on this port

• Off = No Link

Activity

• Flashing Green (~30ms) = Port Activity

• Off = No activity