set protocols vrrp interface vrid ipv6-nd router-preference

The set protocols vrrp interface vrid ipv6-nd router-preference command specifies the value that is set in the Default Router Preference (DRP) field of Router Advertisements (RAs) that the switch sends from an interface. An interface with a DRP value of high will be preferred by other devices on the network over interfaces with an RA value of medium or low.

The delete protocols vrrp interface vrid ipv6-nd router-preference command restores the default configuration.

Command Syntax

set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd router-preference <high | medium | low>

Parameter

Parameter	Description
interface <interface-name>	Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string.
vrid <virtual-router-id>	Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254.
router-preference <high \| medium \| low>	Specifies the value that is set in the Default Router Preference (DRP) field. high: Sets DRP to high. medium: Sets DRP to medium. Default. low: Sets DRP to low.

Example

Configure the value that is set in the Default Router Preference (DRP) field of Router Advertisements (RAs).

admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd router-preference high
admin@Xorplus# commit