run show dot1x radius-port

The run show dot1x radius-port command shows the UDP port information of 802.1X RADIUS server and dynamic authorization server for CoA.

Command Syntax

run show dot1x radius-port

Parameter

None.

Example

View the UDP port information of 802.1X RADIUS server and dynamic authorization server for CoA.

admin@Xorplus# run show dot1x radius-port
Server-IP          Authentication     Accounting        CoA
----------------  ----------------    ----------------  ----------------
2.2.2.2            N/A                N/A               9999 
5.5.5.5            N/A                N/A               3799 
1.1.1.1            2222               1111              8888 
3.3.3.3            6666               7777              N/A
4.4.4.4            1812               1813              N/A

NOTEs:

“N/A” indicates related RADIUS service is not available. For example, in above show result, 2.2.2.2 and 5.5.5.5 are dynamic authorization clients for CoA only, and 4.4.4.4 is a RADIUS server for authentication and accounting without CoA.

The UDP port number of 802.1X RADIUS server shows “N/A” if no RADIUS authentication server IP is configured. The UDP port number of dynamic authorization server of CoA shows “N/A” if no RADIUS dynamic authorization client IP is configured.

The IP addresses of RADIUS dynamic authorization client are shown in the column “Server-IP”, as they are usually located on the RADIUS server.