set protocols dot1x filter sequence from destination-port

The set protocols dot1x filter sequence from destination-port command configures the destination port information of the matching packets based on the NAC-based ACL rules.

Command Syntax

set protocols dot1x filter <filter-name> sequence <sequence-number> from destination-port <port-number>

Parameter

Parameter	Description
filter <filter-name>	Specifies the ACL filter name. The value is a string.
sequence <sequence-number>	Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.
destination-port <port-number>	Specifies the destination port of packets that match ACL rules. The value is an integer. It could be a port number or a range of port number, i.e. 6000; 6000..7000, which indicates port range from 6000 to 7000.

Example

Configure the destination port of packets that match ACL rules to 6000.

admin@Xorplus# set protocols dot1x filter f1 sequence 2 from destination-port 6000
admin@Xorplus# commit