set protocols dot1x interface max-sessions

The set protocols dot1x interface max-sessions command configures the maximum number of NAC sessions that are allowed to be established on a specified interface.

Command Syntax

set protocols dot1x interface <interface-name> max-sessions <max-sessions-number>

Parameter

Parameter	Description
interface <interface-name>	Specifies a physical interface name. The value is like ge-1/1/1, te-1/1/3, etc.
max-sessions <max-sessions-number>	Specifies the maximum number of NAC sessions. The value is an integer in the range of 0 to 512. The default value is 0, indicating that there is no limit on the number of NAC sessions.

Usage Guidelines

This command is configured on a specified interface. Users can also configure the maximum number of NAC sessions globally by using the command set protocols dot1x max-sessions-per-port <max-sessions-number>.

The maximum number of NAC sessions configured on an interface has a higher priority over the value configured globally.

Example

Configure the maximum number of NAC sessions that are allowed to be established on interface ge-1/1/1 to 30.

admin@Xorplus# set protocols dot1x interface ge-1/1/1 max-sessions 30
admin@Xorplus# commit