run show ospf border-routers
Run the command run show ospf border-routers to display OSPF ABRs and ASBRs.
If OSPF is running in multiple instance then add the instance ID parameter to the command to display ABRs and ASBRs within a particular OSPF instance.
Command Syntax
run show ospf [instance-id <instance-id> | vrf<vrf-name>] border-routers
Parameters
Parameter | Description |
instance-id <instance-id> | Optional. Specifies the OSPF instance ID in the default VRF. The value is an integer that ranges from 1 to 8. |
vrf<vrf-name> | Optional. Specifies the VRF name, the value is a string. |
Example
- Â Display ABRs and ASBRs in OSPF instance ID 1.
admin@switch1# run show ospf instance-id 1 border-routers OSPF Instance: 1 ============ OSPF router routing table ============= R 3.3.3.3 [10] area: 1.1.1.1, ASBR via 11.251.201.4, vlan11
Copyright © 2024 Pica8 Inc. All Rights Reserved.