set protocols ospf default-metric

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

Run the command set protocols ospf default-metric to set the default metric for redistributed routes in the OSPF.
The command delete protocols ospf default-metric sets the default metric to be used for redistributed routes into OSPF to the default of 20.


Command Syntax

set protocols ospf [vrf <vrf-name>] default-metric <METRIC-VALUE>

delete protocols ospf [vrf <vrf-name>] default-metric


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies the name of the VRF for the OSPF instance.

default-metric <METRIC-VALUE>

Specifies the default metric value to use for redistributed routes. The value could be an integer that ranges from 0 to 1677214. The default value is 20.


Example

  •  Configure default metric for redistributed routes:
admin@XorPlus# set protocols ospf default-metric 37
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.