set protocols ospf6 interface passive

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

Run the command set protocols ospf6 interface passive to identify a specific interface as OSPFv3 passive interface. Passive interfaces are part of OSPFv3 database but they do not send or receive OSPF LSAs. OSPFv3 does not try to form adjacency relationship with peers on these interfaces.

Run the command delete protocols ospf6 interface passive to remove this configuration.


Command Syntax

set protocols ospf6 interface <interface-name> passive

delete protocols ospf6 interface <interface-name> passive


Parameter

Parameter

Description

interface <interface-name>Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.

Example

  •  Set the interface vlan200 as OSPFv3 passive interface.
admin@XorPlus# set protocols ospf6 interface vlan200 passive
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.