set protocols ospf6 interface transmit-delay

Run the command set protocols ospf6 interface transmit-delay to set the estimated time needed to send an OSPFv3 LSA update packet.

Run the command delete protocols ospf6 interface transmit-delay to remove this configuration from the switch.

Command Syntax

set protocols ospf6 interface <interface-name> transmit-delay <seconds>

delete protocols ospf6 interface <interface-name> transmit-delay <seconds>

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.
transmit-delay <seconds>	Specifies the transmit delay in seconds, the value is an integer that ranges from 1 to 3600.

Example

admin@XorPlus# set protocols ospf6 interface vlan200 transmit-delay 20
admin@Xorplus# commit