run show lldp neighbor

The run show lldp neighbor command displays the neighbor device information of a specified interface or all the interfaces enabled LLDP.

Command Syntax

run show lldp neighbor [<interface-name> | all] [detail]

Parameter

Parameter

Description

[<interface-name> | all]

Optional. Specifies an interface name or all.

all indicates to show the neighbor device information of all the interfaces enabled LLDP. If not specified, it will show the neighbor device information of all the interfaces enabled LLDP.

detail

Optional. Show details of the neighbor device information. If not specified, it will show the brief information of the neighbor device.

Example

Display the details of neighbor device information of all the interfaces enabled LLDP.

admin@XorPlus# run show lldp neighbor all detail 
Local Port: te-1/1/1
LLDP info:
---------------------------------------------------------------------------------------
  Time To Live: 106
  Chassis Id: 68:21:5F:7F:10:C6
  Port ID: te-1/1/1
  Port Description: te-1/1/1
  System Name: PICOS
  System Description: Pica8, Inc.,AS5835_54T, PICOS 4.3.2/9b1219e332
  System Capability: B, RBridge, Router
  System Enabled Capability: Bridge, Router
  Management Address: 10.10.51.12
  Default VLAN ID: 1
  Auto Negotiation: Supported, Enabled
  Physical media capabilities: Others, 10base_T, 100base_TX, 100base_TXFD, 1000base_T, 1000base_TFD
  Media Attachment Unit type: 1000base_T_Full_Duplex
  802.3 Power via MDI :Not available
  
LLDP MED is not Enabled.
 
Total entries displayed: 1