set protocols bgp evpn advertise-all-vni

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols bgp evpn advertise-all-vni command is used to enable the BGP control plane for all VNIs configured on the switch in the default VRF.

Note that only leaf switches that are VTEPs need this configuration.

The delete protocols bgp evpn advertise-all-vni command can be used to delete this configuration.


Command Syntax

set protocols bgp evpn advertise-all-vni

delete protocols bgp evpn advertise-all-vni

Example

  • Configure BGP EVPN to advertise all VNIs in the default VRF.
admin@Xorplus# set protocols bgp evpn advertise-all-vni
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.