set protocols bgp evpn default-originate
To enable originating a default Type-5 route, run the command set protocols bgp evpn default-originate. Both the IPv4 and IPv6 default Type-5 routes are supported to be originated. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF.
The command delete protocols bgp evpn default-originate can be used to remove this configuration.
Command Syntax
set protocols bgp [vrf <vrf-name>]Â evpn default-originate <ipv4 | ipv6>
delete protocols bgp [vrf <vrf-name>] evpn default-originate <ipv4 | ipv6>
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies the name of the VRF. The value is a string. |
default-originate <ipv4|ipv6> | Specifies whether IPv4 or IPv6 Type-5 route to be originated. |
Example
- Configure the device to originate the IPv4 default Type-5 routes for VRF BLUE.
admin@Xorplus# set protocols bgp vrf BLUE evpn default-originate ipv4 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.