run clear ospf interface

Owned by Tracy Yang
Nov 13, 2023
1 min read

Run the command clear ospf interface to clear or reset adjacency with the neighbor session. The specified interface should be a layer 3 interface. 

Command Syntax

run clear ospf interface <l3-interface>

Parameter

ParameterDescription
interface <l3-interface>Specifies the layer 3 interface. The value is a string.

Example

  •  Clear OSPF interface vlan100.
admin@XorPlus# run clear ospf interface vlan100
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.