set protocols ospf traceoption lsa

Owned by Tracy Yang
Nov 13, 2023
1 min read

Run the command set protocols ospf traceoption lsa to enable logging of Link State Advertisement related messages. Three optional parameters, generate, flooding, install, or refresh can be used to specify logging for different types of LSA events. Optional parameter instance-id can be included to specify the OSPFv2 multi-instance ID.


Run the command delete protocols ospf traceoption lsa to remove this configuration.


Command Syntax

set protocols ospf [instance-id <instance-id>] traceoption lsa <generate | flooding | install | refresh>

delete protocols ospf [instance-id <instance-id>] traceoption lsa <generate | flooding | install | refresh>


Parameter

Parameter

Description

instance-id <instance-id>Optional, specifies the OSPF instance ID. The value is an integer that ranges from 1 to 8.

lsa <generate | flooding | install | refresh>

Specifies to enable LSA logging for generate, flooding, install or refresh events.

Example

  •  Enable OSPF LSA logging for flooding related information.
admin@XorPlus# set protocols ospf instance-id 1 traceoption lsa flooding
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.