set protocols ospf compatible rfc1583

Run the command set protocols ospf compatible rfc1583 to enable OSPF compatibility with RFC1583 (backward compatibility). If RFC1583 compatibility is enabled, then the route cost calculation follows a different method.

Run the command delete protocols ospf compatible to delete this configuration.

Command Syntax

set protocols ospf [vrf <vrf-name>] compatible rfc1583

delete protocols ospf [vrf <vrf-name>] compatible

Parameter

Example

•  Enable OSPF RFC1583 compatibility:

admin@XorPlus# set protocols ospf vrf BLUE compatible rfc1583
admin@Xorplus# commit