set protocols ospf timers lsa min-arrival
Run the command set protocols ospf timers lsa min-arrival to set the minimum delay in receiving a new version of an LSA. The value of this parameter is in milliseconds and ranges from 0 to 600000. Optional parameter instance-id can be included to specify the OSPFv2 multi-instance ID. The optional parameter vrf can be used to specify a VRF for the OSPF instance. If a VRF is not specified here, the command will affect OSPF for the default VRF.
Multiple instances of OSPF are only allowed in the default VRF. A maximum of 8 instance can be configured in the default VRF. In non-default VRFs, only single instance OSPF can be configured.
Run the command delete protocols ospf timers lsa min-arrival to remove this configuration and go back to default delay of 1000 milliseconds.
Command Syntax
set protocols ospf [instance-id <instance-id> | vrf <vrf-name>] timers lsa min-arrival <milliseconds>
delete protocols ospf [instance-id <instance-id> | vrf <vrf-name>] timers lsa min-arrival <milliseconds>
Parameter
Parameter | Description |
instance-id <instance-id> | Optional, specifies the OSPF instance ID. The value is an integer that ranges from 1 to 8. |
vrf <vrf-name> | Optional. Specifies the name of the VRF for the OSPF instance. |
min-arrival <milliseconds> | Specify the minimum delay in receiving a new LSA in milliseconds. The value is an integer that ranges from 0 to 600000. |
Example
- Â Configure OSPF minimum delay to receive LSA to 2000 milliseconds for OSPF instance ID 1.
admin@XorPlus# set protocols ospf instance-id 1 timers lsa min-arrival 2000 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.