Run the command set protocols ospf area virtual-link transmit-delay to set the time delay in link state transmission for the OSPF virtual link.
The command delete protocols ospf area virtual-link transmit-delay sets the delay in link state transmission to the default of 1 second for the OSPF virtual link.

Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> transmit-delay <DELAY>

delete protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> transmit-delay

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.
area {<ipv4>\|<area-id>}	Specifies the OSPF area ID. The value could be IPv4 dotted decimal format or an integer that ranges from 0 to 4294967295.
virtual-link <ROUTER-ID>	Configures a virtual link with the specified router ID of the remote ABR.
transmit-delay <DELAY>	Specifies the transit delay in seconds. Range: 1 to 65535. Default: 1.

Example

Configure the OSPF transmit delay on the virtual link.

admin@XorPlus# set protocols ospf area 1.1.1.1 virtual-link 100.0.1.1 transmit-delay 30
admin@Xorplus# commit

Browser not supported