set protocols ospf log-adjacency-changes

Run the command set protocols ospf log-adjacency-changes to log changes in OSPF adjacency state. Optional parameter instance-id can be included to specify the OSPFv2 multi-instance ID in the default VRF. Add the optional detail argument to log all changes in adjacency state. Without the detail keyword, only changes to full or regressions are logged. You can optionally specify the VRF for the single instance OSPF in the non-default VRF for this command to take effect.

Multiple instances of OSPF are only allowed in the default VRF. A maximum of 8 instance can be configured in the default VRF. In non-default VRFs, only single instance OSPF can be configured.

Run the command delete protocols ospf log-adjacency-changes to delete this configuration.

Command Syntax

set protocols ospf [instance-id <instance-id> | vrf <vrf-name>] log-adjacency-changes [detail]

delete protocols ospf [instance-id <instance-id> | vrf <vrf-name>] log-adjacency-changes [detail]

Parameter

Parameter	Description
instance-id <instance-id>	Optional, specifies the OSPF instance ID. The value is an integer that ranges from 1 to 8.
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.
detail	Optional. Specifies to log all changes in adjacency state.

Example

Configure OSPF to log all adjacency changes for VRF BLUE.

admin@XorPlus# set protocols ospf vrf BLUE log-adjacency-changes detail
admin@Xorplus# commit