Run the command set protocols ospf interface cost to set the OSPF link cost for the specified interface. The cost value is set to router-LSA’s metric field and used for SPF calculation. Changing the interface cost causes the OSPF to run the SPF and reissue LSAs.

Run the command delete protocols ospf interface cost to remove this configuration.

Command Syntax

set protocols ospf interface <interface-name> cost <1-65535>

delete protocols ospf interface <interface-name> cost

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.
cost <1-65535>	Specifies the link cost, the value is an integer in the range of 1 to 65535.

Example

Configure the OSPF interface vlan200 cost to 5.

admin@XorPlus# set protocols ospf interface vlan200 cost 5
admin@Xorplus# commit

Browser not supported