Run the command set protocols ospf interface hello-interval to set the OSPF hello interval on the specified interface. Hello packets will be sent every hello-interval of time. The default value is 10 seconds.

Run the command delete protocols ospf interface hello-interval to remove this configuration and revert back to the default 10 seconds.

Command Syntax

set protocols ospf interface <interface-name> hello-interval <seconds>

delete protocols ospf interface <interface-name> hello-interval <seconds>

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.
hello-interval <seconds>	Specifies the hello interval in seconds. The value ranges from 1 to 65535. The default value is 10 seconds.

Example

Configure the hello interval to 60 seconds on interface vlan200.

admin@XorPlus# set protocols ospf interface vlan200 hello-interval 60
admin@Xorplus# commit

Browser not supported