set system aaa tacacs-plus timeout
The set system aaa tacacs-plus timeout command configures the response timeout interval of a TACACS+ server.
Â
Command Syntax
set system aaa tacacs-plus timeout <integer>
Â
Parameters
Parameter | Description |
timeout <integer> | Specifies the response timeout interval of a TACACS+ server. When the NAS server sends a request message to the TACACS+ server, it considers the server is inactive if it receives no response message from the server within the specified time. The value is an integer in seconds. The default value is 5s. |
Â
Example
•  Configure the response timeout interval of a TACACS+ server.
admin@Xorplus# set system aaa tacacs-plus timeout 30
Copyright © 2024 Pica8 Inc. All Rights Reserved.