set protocols bgp evpn disable-ead-evi-rx
Some implementations of EVPN do not advertise EAD-per-EVI routes so to be compatible with these vendors; we need to manually disable advertisement of EAD-per-EVI routes. To activate the VTEP upon receiving EAD-per-ES route and suppress the dependency on EAD-per-EVI routes, run the command set protocols bgp evpn disable-ead-evi-rx.
Optional parameter vrf can be used to identify a specific VRF for this command to take effect on.
The command delete protocols bgp evpn disable-ead-evi-rx can be used to remove this configuration.
Command Syntax
set protocol bgp [vrf <vrf-name>] evpn disable-ead-evi-rx
delete protocol bgp [vrf <vrf-name>] evpn disable-ead-evi-rx
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies the name of the VRF. The value is a string. |
Example
- Configure the device to disable EVPN advertisement of EAD-per-EVI routes in VRF BLUE.
admin@Xorplus# set protocols bgp vrf BLUE evpn disable-ead-evi-rx admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.