set protocols evpn mh mac-holdtime

Run the command set protocols evpn mh mac-holdtime to configure the EVPN MH MAC hold time in seconds. This is the length of time for which a device maintains the SYNC MAC entries after the Ethernet segment (ES) peer's type-2 route is deleted. The device will try and attempt to establish reachability with MAC on the local ES during this time. The MAC hold time ranges from 0 to 86400 and the default value is 1080 seconds.

Run the command delete protocols evpn mh mac-holdtime to delete this configuration.

Note: This is a global configuration and affects the MH configuration on the whole device.

Command Syntax

set protocols evpn mh mac-holdtime <seconds>

delete protocols evpn mh mac-holdtime  

Parameter

Example

• Configure the EVPN MH MAC hold time to 234 seconds.

admin@Xorplus# set protocols evpn mh mac-holdtime 234
admin@Xorplus# commit