run show port-security brief
The run show port-security brief command briefly displays the port security configuration and statistics information for all the secure ports.
Command Syntax
run show port-security brief
Parameter
None.
Example
Run the command run show port-security brief to briefly view the port security configuration and statistics information.
admin@Xorplus# run show port-security brief Secure Port   MaxMacLimit   CurrentAddr   ViolationCount   Action    --------------------------------------------------------------------------------------------------------------- ge-1/1/22     2               0             0              restrict    ge-1/1/23     1               0             0              shutdown-temp ge-1/1/34     1               0             0              protectÂ
Table 1. Description of the run show port-security brief command output
Item | Description |
Secure Port | Indicates the port enabled port security. |
MaxMacLimit | Indicates the maximum number of secure MAC addresses that can be learned on the interface. |
CurrentAddr | Indicates the secure MAC addresses on the interface. |
ViolationCount | The number of times that violation was triggered. Note that port security violations are counted only if the port security violation mode is restrict, shutdown, or shutdown-temp. |
Action | Indicates the protective action for the system to perform when the number of learned MAC addresses exceeds the limit. The value could be protect, restrict, shutdown or shutdown-temp. |
Copyright © 2024 Pica8 Inc. All Rights Reserved.