show interface aggregate-ethernet <lag_name> dot1q-tunneling
- Tracy Yang
Owned by Tracy Yang
May 24, 2024
1 min read
Loading data...
This command is to show dot1q-tunneling on a specified LAG.
Command Syntax
run show interface aggregate-ethernet <lag_name> dot1q-tunneling
Parameter
•<lag_name> Name of LAG interface.
Example
• This example is to show bpdu tunneling:
admin@XorPlus# run show interface aggregate-ethernet ae1 dot1q-tunneling Dot1q Tunneling Mode: internal, Ether Type: 0x8100
Copyright © 2024 Pica8 Inc. All Rights Reserved.