show interface diagnostics optics all
This command is to show diagnostics informations of all interface or a specified interface.
Command Syntax
run show interface diagnostics optics [all | <interface-name>]
Example
• This example is to show diagnostics informations:
admin@Xorplus# run show interface diagnostics optics all Interface Temp(C/F) Voltage(V) Bias(mA) Tx Power(dBm) Rx Power(dBm) Module Type -------------- ----------- ---------- -------- ------------- ------------- ----------- te-1/1/1(49) 27.78/82.00 3.27 6.88 -3.38 -20.00 10G_BASE_SR admin@Xorplus# run show interface diagnostics optics te-1/1/1 Interface Temp(C/F) Voltage(V) Bias(mA) Tx Power(dBm) Rx Power(dBm) Module Type -------------- ----------- ---------- -------- ------------- ------------- ----------- te-1/1/1(49) 27.78/82.00 3.27 6.88 -3.38 -20.00 10G_BASE_SR
The number (49) with the interface name is the physical port label of the interface.
Copyright © 2024 Pica8 Inc. All Rights Reserved.