set l3-interface vlan-interface ipv6-nd mtu

Owned by Tracy Yang
May 24, 2024
1 min read

Run the command set l3-interface vlan-interface ipv6-nd mtu to include the MTU option is RA packets. This option assists the hosts in proper interface configuration. The advertised MTU is not verified to be consistent with the actual router interface MTU.

Run the command delete l3-interface vlan-interface ipv6-nd mtu to delete this option. This value is not configured in RA packets by default.


Command Syntax

set l3-interface vlan-interface <vlan-interface> ipv6-nd mtu <value>

delete l3-interface vlan-interface <vlan-interface> ipv6-nd mtu


Parameters

ParameterDescription
vlan-interface <vlan-interface>Specifies the VLAN interface name. The value is a string.
mtu <value>Specifies the MTU value to advertise in RA packets. The value is an integer that ranges from 1 65535.

Example

  • This example configures the advertised MTU value to 1000.
admin@XorPlus# set l3-interface vlan-interface vlan4001 ipv6-nd mtu 1000
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.