set protocols ovsdb controller address

User can configure ovsdb vtep to establish an active OVSDB tcp/ssl connection to a controller.

Command Syntax
set protocols ovsdb controller <controller-name> address <ip-addr>

delete protocols ovsdb controller <controller-name> address

Parameters

Parameter	Description
controller <controller-name>	controller name.
address <ip-addr>	Specifies the destination IPv4/IPv6 address for the tcp/ssl connection.

Example
• This example demonstrates how to configure a tcp/ssl connection to port 6632 at 10.10.50.220.

admin@XorPlus# set protocols ovsdb controller c1 address 10.10.50.220
admin@XorPlus# commit