set l3-interface vlan-interface anycast mac

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read


The set l3-interface vlan-interface anycast mac command configures the virtual MAC address of the anycast gateway.


Command Syntax

set l3-interface vlan-interface <interface-name> anycast mac <mac-address>


Parameter

Parameter

Description

vlan-interface <interface-name>

Specifies the L3 VLAN interface. The value is a string.

mac <mac-address>

Specifies the virtual MAC address of anycast gateway. The value is a string in xx:xx:xx:xx:xx:xx format where x is a hexadecimal number.


Example

  • Configure the virtual MAC address of the anycast gateway.
admin@Xorplus# set l3-interface vlan-interface vlan10 anycast mac AE:00:10:00:00:FE
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.