set protocols evpn mh mac-holdtime
Run the command set protocols evpn mh mac-holdtime to configure the EVPN MH MAC hold time in seconds. This is the length of time for which a device maintains the SYNC MAC entries after the Ethernet segment (ES) peer's type-2 route is deleted. The device will try and attempt to establish reachability with MAC on the local ES during this time. The MAC hold time ranges from 0 to 86400 and the default value is 1080 seconds.
Run the command delete protocols evpn mh mac-holdtime to delete this configuration.
Note:Â This is a global configuration and affects the MH configuration on the whole device.
Command Syntax
set protocols evpn mh mac-holdtime <seconds>
delete protocols evpn mh mac-holdtime Â
Parameter
Parameter | Description |
mac-holdtime <seconds> | Specifies the MAC hold time in seconds, the range is from 0 to 86400. The default value is 1080 seconds. |
Example
- Configure the EVPN MH MAC hold time to 234 seconds.
admin@Xorplus# set protocols evpn mh mac-holdtime 234 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.