set l3-interface routed-interface router-mac

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023

The set l3-interface routed-interface router-mac command sets the router MAC address of the anycast gateway on a routed interface or sub-interface.


Command Syntax

set l3-interface routed-interface <interface-name> router-mac <macaddr>


Parameter

Parameter

Description

routed-interface <interface-name>

Specifies a routed interface name or sub-interface name. The value is a string.

router-mac <macaddr>

Specifies the virtual MAC address of anycast gateway. The value is a string in xx:xx:xx:xx:xx:xx format where x is a hexadecimal number.


Example

  • Configure the router MAC address of the anycast gateway on a routed interface.
admin@Xorplus# set l3-interface routed-interface rif-te3 router-mac 00:00:10:00:00:FE
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.