set firewall filter sequence from vlan

To configure a filer sequence to filter packets in a specific VLAN, use the set firewall filter sequence from vlan command in L2/L3 configuration mode.

Command Syntax

set firewall filter filter-name sequence number from vlan vlan-id
delete firewall filter filter-name sequence number from vlan

Parameters

Example

The following example applies sequence 2 of MyFilter filter to VLAN 3:

admin@Switch# set firewall filter MyFilter sequence 2 from vlan 3
admin@Switch# commit
admin@Switch# delete firewall filter MyFilter sequence 2 from vlan
admin@Switch# commit