run show filter
The command displays information about all filters or a specified filter.
Command Syntax
run show filter [<filter-name>]
Parameter
• <filter-name> Optional. Specifies a filter name.
Example
• This example shows all filter information:
admin@XorPlus# run show filter Filter: f1 Description: asa Input interface: ge-1/1/1 Filter: f2 Description: Input interface: vlan2 Filter: f3 Description: Output interface: ge-1/1/2 Filter: f4 Description: Output interface: vlan2 • Show filter f1 XorPlus# run show filter f1 Filter: f1 Description: asa Input interface: ge-1/1/1
- This example shows an ACL-based ERSPAN information:
admin@Xorplus# run show filter f1 Filter: f1 Description: Sequence: 1 Description: match counter: 751233 packets match-condition: protocol: tcp source-address-ipv4: 1.1.1.100/32 action: forward Erspan Output: state: UP source-ip: 172.1.1.100 dest-ip: 192.1.1.100 output-port: te-1/1/2 tagged vlan: vrf: ttl: 255 forwarding_class: Input interface: te-1/1/1
Copyright © 2024 Pica8 Inc. All Rights Reserved.